Listed below will be most of the sights available. I make most inhouse on an as needed basis. Delivery time on blades is usually 1-2 weeks. Complete sight installation will vary with workload. Contact me with any questions or ideas you may have.
Vaquero- Large and medium frame guns:
I make this sight inhouse and is initially available with a Target style blade and 1/8" notch. Profile is as low as possible. Sight is slightly narrower than topstrap to afford some protection should the gun be dropped. Sight is secured in place with a small heat treated screw. Looks like the design will enable the sight to be adapted to other fixed sight guns also. Front sight will be a partridge design and windage adjustable mounted on barrel using a small base. Due to the complexity of the cut needed in the topstrap for installation and the need of a CNC mill to do it, I will only sell these on an installed basis. Additional offerings are a white outline blade and a V-notch blade. Cost for installation on your Vaquero is $250.
|
The Smith and Wesson prewar type sights are made inhouse from barstock. I have 4 different sights that can be used on several different fixed sight guns. So far I have adapted them to the GP100, S&W N-frame, Vaquero, Bearcat, USFA, & Colt SAA. Sights are adjustable for windage and elevation. Blade has a 1/8" notch. This is the lowest adjustable sight installation available at the present time. Sights are fitted to each individual gun and contoured to match receiver. Bluing of the barreled receiver will be necessary in most cases. The front sight will require replacement also with a base and pinned blade arrangement being necessary. A 1 piece front sight is used in some applications. Complete installation cost is $250 on most guns. Guns with bone colorcased receivers are $25 additional. Special notch rear blades available- inquire. Individual unfinished rear sights are available for $95.
|
Adjustable sight installation on NM Bearcat
|
|
|
