EDM Produced Barrels

I am producing the following 2 barrel styles by EDM machining to 5 1/2" length.  Both have a tapered profile, integral front sight base, and can be had to fit a NM or OM gun. Available in all calibers in blue or stainless.

1. Ovate with flat rib - $450

2. Round with full length rib - similar to S&W N-frame standard barrels - $450

Prices shown are in addition to conversion price when these barrels are substituted for the standard barrel.  For rebarreling projects only add $250 to above barrel cost. A fitted steel ejector housing in included.

Our EDM also allows us to offer a wide variety of front sights.  We offer a fluted base with pinned blade and a  fluted base with blade held in by a screw, similar to Freedom Arms.  Standard blade profile is a modified post with a 20 degree forward tilt and serrated to eliminate glare.  Any blade profile can be substituted at no extra charge.

Click on the image for a larger view   
  All stainless .44 Magnum Bisley - 7 1/2" octagon ribbed barrel

Conversions

Basic tuneup package for all Ruger SA's:  Action job, install oversize basepin with lock screw, recut forcing cone, open cyl. throats, correct timing as needed, install Bowen rear sight and custom interchangeable blade front sight. - $425 SS or blue.

To shorten barrel add $75
Set barrel/cyl. gap and endshake to minimum add $100

Click on the image for a larger view
  Old Model Ruger Blackhawk .41 Magnum

.22 Single Six: New unfluted 6 shot cylinder is made and fitted to frame. Cylinders feature match grade chambers with proper throat size and linebored for accuracy.  Oversize base pin, action job and new barrel standard. Factory front sight remounted.  $995

Add $295 for extra cylinder in .22 Magnum

6 Shot Accurized Conversions for OM and NM Blackhawk and Vaquero Rugers: All are fitted with new, custom barrel with straight or factory taper.  Cylinder is linebored and rechambered.  Endshake and barrel/cylinder gap are set to minimum.  Oversize cylinder bolt installed.  Timing corrected and cyl. bearing surfaces inside frame faced as needed. Oversize basepin and action job standard.

Custom front sight with pinned blade standard.  Vaqueros are fitted with a dovetailed, windage adjustable front sight. Cyl. will lockup tight and in line with barrel for maximum accuracy.  Specify barrel length to 8" and profile wanted.  $875  Barrel lengths under 4 5/8" $25 extra.

Standard 6 shot conversions for OM, NM  and Vaquero Rugers: All are fitted with new, custom barrels with straight or tapered contour. 11 degree forcing cone and custom pinned blade front sight standard. Vaqueros will have a factory type front sight mounted.  Cylinders are rechambered and throats cut to proper size for cast bullets.  Endshake is set to minimum.  Specify barrel length to 8" and profile wanted.  $600  for barrel lengths under 4 5/8" add $25

New Model Blackhawks and Vaqueros:  .44 Special  .44-40  .38-40  10mm  40 S&W   .41 Magnum  .45 ACP  .45 Colt  .44 Magnum

Click on the image for a larger view
NM Bisley with 45 Colt/45 ACP with extra length custom cyl. 5 1/2" ribbed barrel

Flat Tops and 3 Screws with .357 size frames:  .44 Special  10mm  40 S&W   .41 Special  .41 Magnum   .45 Colt (light loads only)  .45 Schofield

Click on the image for a larger view
357 Flat Top with ovate barrel

Popular options on standard 6 shot conversions:
Oversize Belt Mtn. #5 base pin $50
Bowen rear sight $85 - $90
Steel ejector hsg. $35
Action job $90
Color caseharden frame  $225  Hammer, trigger and ejector rod $25 each

Jeff Quinn Special: NM & OM Ruger 357 conversion to .44 Special.  Conversion utilizes factory barrel cut at 4 5/8" or 5 1/2", rebored to .44 cal., forcing cone cut to 11 degrees, and muzzle recrowned.  Cyl. is rechambered.  Custom made .110" wide fixed blade sight of proper height standard.  Frame, hammer, trigger and ejector rod color casehardened.  Balance of gun is blued.  $650  All blue version $450.

Click on the image for a larger view
  Old Model Ruger .357 Blackhawk converted to .44 Special

5-shot conversions:  All feature an oversize unfluted cylinder with recessed case heads fitted to frame with minimum endshake and headspace.  Cylinder bearing surfaces inside frame are faced true, oversize base pin with lock screw, steel ejector housing, crescent head ejector rod, custom post style front sight with interchangeable blade held in with setscrew, freewheeled cylinder, and .800" dia. bull barrel in your choice of length to 8" standard.  Action is tightened and blocked.  Factory grips recontoured, sanded to frame and refinished.  Load data furnished.  $1650

45 Colt, 475 Linebaugh, 500 Linebaugh, 50 Action Express, 480 Ruger, 454 Casull, 500 S&W 1.4" case

Click on the image for a larger view
  .475 Magnum Ruger Bisley with stainless cylinder and 5 1/2" Express barrel.

6-shot Conversions to above specs are available in the following calibers:

357 Magnum, 41 Magnum, 44 magnum, 45 Colt, 32-20 WCF, .360 Dan Wesson - Others on request $1500

5-shot 45 Colt conversion with factory barrel:  Oversize cylinder and base pin with lock screw are fitted to frame. Factory barrel is refitted and forcing cone cut to 11 degrees.  Action is tightened and blocked and trigger creep is set to minimum.  $895

Shorten factory barrel add $75

Complete refinishing of your gun is included in SA conversion prices.  Specify one of the following options when ordering:

Blue guns:

• Matte blue

• Polished blue (similar to factory blue)

• High polished blue (add $50)

Stainless guns:

• Brushed (similar to factory finish)

• Beadblasted to a matte finish

• On guns that came from the factory with a high polish (eg. Vaqueros) we will duplicate factory finish if desired.

Old caliber designations are removed and gun is properly remarked.  Alloy parts are refinished as needed with a black epoxy paint.  Worn alloy ejector housings and rear sight are replaced as needed at no extra charge.

Click Here for Order Form

Ruger Double Actions

Click on the image for a larger view
  4 1/2" barreled Ruger Redhawk .44 Magnum

The following conversions are offered for the Redhawk.  Endshake and barrel/cyl. gap set to minimum on all Ruger DA conversions.
.44 Magnum to .45 Colt conversion: Factory cylinder is rechambered to tight dimensions.  Barrel is rebored.  New taller front sight is fitted to barrel.  This conversion is suited for heavy loads just under 5 shot level.  $425

To shorten factory barrel add $150

5-shot 45 Colt, 454 Casull, 480 Ruger, and 500 Linebaugh: 5-shot cylinder, action tune, rubber grips, 1-piece L-frame style barrel with pinned blade front sight are standard.  Specify barrel length to 5 1/2".  Load data furnished.  $1995

For ventilated rib Anaconda style barrel add $100
Conversion utilizing rebored factory barrel $1400  (rebored barrels not available in 480 Ruger cal.)

Redhawk Carry package: Cut barrel to 4", mount new front sight with pinned blade, slabside barrel for weight reduction, blackpowder chamfer cylinder, action tune, roundbutt gripframe, bead blast finish with high polished hammer, trigger and pins - $450 SS    $525 Blue

Click Here for Order Form

  OPTIONS and MISCELLANEOUS

• L-frame style barrel for 44 or 45 Redhawk - $995  For ventilated rib add $100 Specify length to 5 1/2"

• All prices for DA Conversions are for stainless guns.  Add $75 for blue guns.  Stainless guns can be bead blasted for a soft matte finish is desired for $85

• Fit 44 cyl. to 45 Colt Redhawk and rechamber to tight 45 Colt dimensions - $250  Cyls. subject to availability. 
  

Click on the image for a larger view
  5" barreled GP100 5 shot .44 Special - POR