-
Blue
complete handgun - from $150.00
-
Beadblast
stainless gun for a matte finish - $85.00
-
Bone
charcoal color caseharden frame - $225.00;
hammer, trigger or ejector rod - $25.00 each
-
Mag-Na-Porting: 2-port
$95.00 4-port $125.00
-
Express barrel on any SA conversion add
$200.00
-
Cut SA
barrel and remount factory front
sight $125.00
-
Cut
blue or SS SA barrel and mount custom front sight with pinned blade
$175.00
-
Cut
SA barrel and mount custom front sight with interchangeable blade held in
with setscrew $200
-
Vaquero:
shorten barrel and install windage adjustable dovetailed front sight $135.00
-
Vaquero:
install windage adjustable dovetailed front sight $85
-
Cut
DA barrel and mount custom from sight with pinned blade $185.00
-
Install
pinned post style blade in factory sight $75.00
-
Install post style
blade on stainless factory barrel $50.00
-
Install
custom front sight with interchangeable blade held in with setscrew on
factory barrel $125
-
Install
custom front sight with pinned blade on factory barrel $100
-
Extra
sight blades with custom sight work $30 each
-
Add
gold bars to sight blades $15 per bar
-
Bowen
rear sight - Target style $90.00 - Rough Country $85
-
Custom
grips - inquire
-
Overtravel stop for DA revolver
$25.00
-
Install
ejector hsg. stud in barrel $65
-
Action job: 3-4 lb. trigger pull,
sear surfaces are casehardened on blue guns SA $90.00 DA
$100.00 Specify pull weight wanted.
-
Install
New factory pawl to correct timing $40
-
Freewheel
New Model SA cylinder $25.00
-
Install
Power Custom free-spin pawl $50 NM guns only
-
Blue
steel ejector housing $35.00 Target length $55.00
-
Bowen
oversized
base pin with lock screw $65.00
-
Install
Belt Mtn. base pin - $40 - $65 depending on which pin used, standard ,
knurled, #5, or Colt style head
-
Colt
style black powder chamfer cut on fluted cylinder $50
-
Hardchrome
complete gun $200 Specify matte or brushed finish
-
Furnish
and fit Bisley hammer to Blackhawk $75.00 NM guns only
-
Furnish
and fit Super Blackhawk hammer to Blackhawk $45.00 NM guns only
-
Correct
cylinder endshake - SA $40.00 DA- $30.00
-
Set
barrel/cylinder gap $75.00
-
Polish
cylinder bolt notch leedes $20.00
-
Install
bushing in SA trigger pivot hole to reduce play $25.00 NM guns
only
-
Jewel
hammer or trigger $15.00 each
-
Reduced
power hammer or trigger spring $6.00
-
Round
butt SA or DA grip frame and recontour grips - $95.00
stainless $125.00 blue
-
Recut
forcing come to 11 degrees $25.00
-
Recrown
muzzle $25.00 most guns
-
Install
ball crane lock in S&W $35.00 Install double ball
crane lock in N Frame S&W $50.00
-
Open
cylinder throats $55.00
-
Install
steel grip frame - from $75.00 labor plus parts and bluing
-
Bevel
and serrate Vaquero front sight $25.00
-
Engrave
customer's name or initials on gun $15.00 (all capital block letters
on barrel or side of receiver only)
-
Engraving
in script letters - This type of engraving is available for $15 per line
with a $10 programming fee applicable to first gun. We save these CNC
programs and do the same engraving on another gun for $15
-
Port
revolver barrel in house $75.00
-
Remove
warning label on Ruger barrel $25 when done with other barrel work,
otherwise $50
-
Rechamber
cylinder only $150
-
Install
Decelerator recoil pad, includes shortening stock $75
-
Action
job on Marlin lever action $90
-
Extend
magazine tube on Marlin lever action $125
-
Install
S&W rear and pinned blade front sight on Vaquero $175
-
V-notch
rear sight blade to fit standard factory sight and Big Dot front on any
Ruger package or conversion add $100.
For tritium front add additional $50
-
Bowen
Rough Country v-notch rear sight and Big Dot front on any Ruger package or conversion
add $175
For tritium front add additional $50
All prices shown
include bluing where needed. Prices do not include cost of basic
gun. No extra charge for stainless steel barrels and cylinders.
Specify matte or polished blue on conversions.
I
can now furnish basic guns to build on. These must be paid for up
front. Call for current prices. There will be an extra 10% added to
all handgun work when I furnish the basic gun to cover the FET unless noted. A
current FFL will be needed from a local dealer to deliver gun.
SA
conversions for .475 and up should be done on guns utilizing the Bisley grip
frame. These frames have superior recoil handling ability. If your gun does
not have one I can fit one. They are available in blue or stainless steel .
Front
sight blades can be thinned to less than .125". Please specify
desired thickness when ordering.
All
custom cylinders are made to fit each individual frame, as no two are the
same. They are line bored through the frame to insure proper bullet/barrel
alignment. Cylinder throats are properly sized for best performance with
cast bullets.
We
offer the following parts for sale: All hammers and triggers are made inhouse
from A-2 toolsteel. All are heat-treated to the proper hardness.
Sear surfaces on hammer is cut for minimal creep. Most will require some
minor fitting.
